API 5L X 42 PSL 1 PIPES

Stockist & supplier of API 5L X 42 PSL 1 Pipe, extra strength API 5L X 42 PSL 1 Pipe.
API 5L X 42 PSL 1 Pipe Carbon steel pipe dealers and distributor in India, buy any quantity & size at best price.
Distributor of American petroleum institute (API) specification pipe. API 5L X 42 PSL 1 Pipe is available in various sizes, weights and black and galvanized grades both seamless and electric welded. Rexal Tubes carries a large inventory of API 5L X 42 PSL 1 Pipe & A106 carbon steel pipe. Our carbon steel pipe is only purchased from the top A.P.I. certified manufacturers, so you’ll know you’re buying quality API 5L carbon steel pipe. Large OD used steel pipe is our specialty!
Chemtech Alloys Pvt Ltd. offers competitive pricing on API 5L carbon steel pipe, so be sure to contact us.
API 5L X42 PSL 2 Pipe Specification:-
API 5L X42 PSL 1 Pipe Dimensions Table | |
Trade Name | API 5L X42 PSL 1 Pipe |
Weld Alternatives: | ERW, HF, DSAW/SAWL, SMLS, HSAW |
OD Size Range: |
ERW: 0.375" through 30" HF: 0.840" through 24" DSAW/SAWL: 12.75" through 144" SMLS: 0.840" through 26" HSAW: 8.625" through 144" |
Wall Ranges: |
ERW: 0.120" through 1.000" HF: 0.120" through 1.000" DSAW/SAWL: 0.250" through 6.000" SMLS: 0.250" through 2.500" HSAW: 0.250" through 1.000" |
Lengths: |
Single Random Double Random Custom (up to 300′) |
Grade: | ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345 |
Schedule: | SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS |
Surface Finishes: | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. |
End Finishes: | Beveled, Square Cut, Threaded & Coupled. |
Additional Services: | Internal Coating |
API 5L X 42 PSL 1 Pipe Physical Properties :-
API 5L Grade | Yield Strength min. (ksi) | Tensile Strength min. (ksi) | Yield to Tensile Ratio (max.) | Elongation min. %1 |
A | 30 | 48 | .93 | 28 |
B | 35 | 60 | .93 | 23 |
X42 | 42 | 60 | .93 | 23 |
API 5L X42 | (PSL1) |
Minimum Yield Strength: | 42,100 psi |
Maximum Yield Strength: | None |
Minimum Tensile Strength: | 60,200 psi |
Maximum Tensile Strength: | None |
Notes: This grade may be used for standard pipe, line pipe or conduit pipe as specified in the various ASTM and API specifications. |
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis a | ||||||
SEAMLESS PIPES | ||||||
C | Mn | P | S | V | Nb | Ti |
max b | max.b | max. | max. | max. | max. | max. |
.28 | 1.20 | 0.030 | 0.030 | c,d | c,d | d |
WELDED PIPE | ||||||
.26 | 1.20 | 0.030 | 0.030 | c,d | c,d | d |
MECHANICAL REQUIREMENTS
Y.S Mpa(psi) |
T.S Mpa(psi) |
ELONGATION |
min | min | min |
245(35 500) | 415(60 200) | 28% |
0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum
concentration for manganese is permissible, up to a maximum of 1.65% Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
The sum of the niobium , vanadium and titanium concentratons shall be ≤0.06%.
Unless otheriwse agreed.
Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
API 5L X42 PSL 1 Pipe Application
Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. API 5L X 42 PSL 1 Pipe is Environmentally Friendly as well Cost-Effective.
Carbon steel pipe – Examples of use
Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.
API 5L X 42 PSL 2 PIPES
Stockist & supplier of API 5L X42 PSL 2 Pipe, extra strength API 5L X42 PSL 2 Pipe.
API 5L X42 PSL 2 Pipe Carbon steel pipe dealers and distributor in India, buy any quantity & size at best price.
Carbon steel pipe in API grades API 5L X42 PSL 2 Pipe, welded A53B and seamless A106B are represented in this stock list. As a leading steel pipe company, Rexal Tubes offers a large inventory of pipe and tubing sizes from 1/8” NPS to 48” NPS. Large OD used steel pipe is our specialty!
Spiral weld are available upon request. An Extensive and Impressive Inventory - You will find unique and difficult to source steel tube sizes at Rexal Tubes.
Welded Structural Pipe Specs
A53b: 35,000 min yield / 60,000 min tensile
Seamless Structural Pipe Specs
A106b: 35,000 min yield / 60,000 min tensile
API 5L X42 PSL 2 Pipe Specification:-
API 5L X42 PSL 2 Pipe Dimensions Table
Trade Name
API 5L X42 PSL 2 Pipe
Weld Alternatives:
ERW, HF, DSAW/SAWL, SMLS, HSAW
OD Size Range:
ERW: 0.375" through 30"
HF: 0.840" through 24"
DSAW/SAWL: 12.75" through 144"
SMLS: 0.840" through 26"
HSAW: 8.625" through 144"
Wall Ranges:
ERW: 0.120" through 1.000"
HF: 0.120" through 1.000"
DSAW/SAWL: 0.250" through 6.000"
SMLS: 0.250" through 2.500"
HSAW: 0.250" through 1.000"
Lengths:
Single Random
Double Random
Custom (up to 300′)
Grade:
ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345
Schedule:
SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS
Surface Finishes:
Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
End Finishes:
Beveled, Square Cut, Threaded & Coupled.
Additional Services:
Internal Coating
API 5L X42
(PSL2)
Minimum Yield Strength:
42,100 psi
Maximum Yield Strength:
71,800 psi
Minimum Tensile Strength:
60,200 psi
Maximum Tensile Strength:
110,200 psi
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute).
Grade B
(ASTM A53, A106, A523)
(API 5LR)
(API 5L PSL2)
Minimum Yield Strength:
35,000 psi
35,500
35,000 psi
Maximum Yield Strength:
None
65,000 psi
Minimum Tensile Strength:
60,000 psi
60,200
60,000 psi
Maximum Tensile Strength:
None
110,000 psi
Notes: This grade may be used for standard pipe, line pipe or conduit pipe as specified in the various ASTM and API specifications
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum
CARBON EQUIVALENT a
% MAXIMUM
Cb
Si
Mnb
P
S
V
Nb
Ti
Other
CEIIW
CEPcm
SEAMLESS & WELDED PIPES
L290R OR X42R
0.24
0.4
1.2
0.025
0.015
0.06
0.05
0.04
e
0.43
0.25
L290Q OR X42Q
0.18
0.45
1.4
0.025
0.015
0.05
0.05
0.04
e
0.43
0.25
WELDED PIPE
L290M OR X42M
0.22
0.45
1.3
0.025
0.015
0.05
0.05
0.04
e
0.43
0.25
MECHANICAL REQUIREMENTS
Y.S
Mpa(psi)
T.S
Mpa(psi)
ELONGATION
min
min
min
290(42 100)
495(71 800)
f
API 5L X52 PSL 2 Pipe Application
Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. API 5L X42 PSL 2 Pipe is Environmentally Friendly as well Cost-Effective.
Carbon steel pipe – Examples of use
Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.

Stockist & supplier of API 5L X42 PSL 2 Pipe, extra strength API 5L X42 PSL 2 Pipe.
API 5L X42 PSL 2 Pipe Carbon steel pipe dealers and distributor in India, buy any quantity & size at best price.
Carbon steel pipe in API grades API 5L X42 PSL 2 Pipe, welded A53B and seamless A106B are represented in this stock list. As a leading steel pipe company, Rexal Tubes offers a large inventory of pipe and tubing sizes from 1/8” NPS to 48” NPS. Large OD used steel pipe is our specialty!
Spiral weld are available upon request. An Extensive and Impressive Inventory - You will find unique and difficult to source steel tube sizes at Rexal Tubes.
Welded Structural Pipe Specs
A53b: 35,000 min yield / 60,000 min tensile
Seamless Structural Pipe Specs
A106b: 35,000 min yield / 60,000 min tensile
API 5L X42 PSL 2 Pipe Specification:-
API 5L X42 PSL 2 Pipe Dimensions Table | |
Trade Name | API 5L X42 PSL 2 Pipe |
Weld Alternatives: | ERW, HF, DSAW/SAWL, SMLS, HSAW |
OD Size Range: |
ERW: 0.375" through 30" HF: 0.840" through 24" DSAW/SAWL: 12.75" through 144" SMLS: 0.840" through 26" HSAW: 8.625" through 144" |
Wall Ranges: |
ERW: 0.120" through 1.000" HF: 0.120" through 1.000" DSAW/SAWL: 0.250" through 6.000" SMLS: 0.250" through 2.500" HSAW: 0.250" through 1.000" |
Lengths: |
Single Random Double Random Custom (up to 300′) |
Grade: | ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345 |
Schedule: | SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS |
Surface Finishes: | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. |
End Finishes: | Beveled, Square Cut, Threaded & Coupled. |
Additional Services: | Internal Coating |
API 5L X42 | (PSL2) |
Minimum Yield Strength: | 42,100 psi |
Maximum Yield Strength: | 71,800 psi |
Minimum Tensile Strength: | 60,200 psi |
Maximum Tensile Strength: | 110,200 psi |
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute). |
Grade B | (ASTM A53, A106, A523) | (API 5LR) | (API 5L PSL2) |
Minimum Yield Strength: | 35,000 psi | 35,500 | 35,000 psi |
Maximum Yield Strength: | None | 65,000 psi | |
Minimum Tensile Strength: | 60,000 psi | 60,200 | 60,000 psi |
Maximum Tensile Strength: | None | 110,000 psi | |
Notes: This grade may be used for standard pipe, line pipe or conduit pipe as specified in the various ASTM and API specifications |
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum | CARBON EQUIVALENT a % MAXIMUM |
||||||||||
Cb | Si | Mnb | P | S | V | Nb | Ti | Other | CEIIW | CEPcm | |
SEAMLESS & WELDED PIPES | |||||||||||
L290R OR X42R | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e | 0.43 | 0.25 |
L290Q OR X42Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
WELDED PIPE | |||||||||||
L290M OR X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e | 0.43 | 0.25 |
MECHANICAL REQUIREMENTS
Y.S Mpa(psi) |
T.S Mpa(psi) |
ELONGATION |
min | min | min |
290(42 100) | 495(71 800) | f |
API 5L X52 PSL 2 Pipe Application
Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. API 5L X42 PSL 2 Pipe is Environmentally Friendly as well Cost-Effective.
Carbon steel pipe – Examples of use
Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.