API 5L X 52 PSL 1 PIPES

API 5L X 52 PSL 1 PIPES

Stockist & supplier of API 5L X 52 PSL 1 Pipe, extra strength API 5L X 52 PSL 1 Pipe.

API 5L X 52 PSL 1 Pipe Carbon steel pipe dealers and distributor in India, buy any quantity & size at best price.

Chemtech Alloys Pvt. Ltd. has many sizes, grades, and OD’s ranging from 2-3/8″ to 13-3/8″. Whether it’s API 5L X 52 PSL 1 Pipe, Gr B, X42, X52, X65, X70, X80 etc. We aggressively seek the best possible pricing from all our sources. Large OD used steel pipe is our specialty!

These efforts are relflected in our ability to pass our competitive prices on to you. Our strength in buying can save you money. We bring the largest selection of API 5L carbon steel tube and pipe products to market, including custom structural steel tubing and ASTM pipe products with specialty dimensions. With our immense range of sizes, we are confident we have the products you need.

API 5L X52 PSL 1 Pipe Specification:-

API 5L X52 PSL 1 Pipe Dimensions Table
Trade Name API 5L X52 PSL 1 Pipe
Weld Alternatives: ERW, HF, DSAW/SAWL, SMLS, HSAW
OD Size Range: ERW: 0.375" through 30"
HF: 0.840" through 24"
DSAW/SAWL: 12.75" through 144"

SMLS: 0.840" through 26"
HSAW: 8.625" through 144"
Wall Ranges: ERW: 0.120" through 1.000"
HF: 0.120" through 1.000"
DSAW/SAWL: 0.250" through 6.000"

SMLS: 0.250" through 2.500"
HSAW: 0.250" through 1.000"
Lengths: Single Random
Double Random
Custom (up to 300′)

Grade: ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345
Schedule: SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS
Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
End Finishes: Beveled, Square Cut, Threaded & Coupled.
Additional Services: Internal Coating


API 5L X 52 PSL 1 Pipe Physical Properties :-

API 5L Grade Yield Strength min. (ksi) Tensile Strength min. (ksi) Yield to Tensile Ratio (max.) Elongation min. %1
A 38 48 .93 28
B 35 60 .93 23
X52 52 66 .93 21


API 5L X52 (PSL2)
Minimum Yield Strength: 52,200 psi
Maximum Yield Strength: None
Minimum Tensile Strength: 66,700 psi
Maximum Tensile Strength: None
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute) specification 5L.


API 5L X52 Industry Specifications Chemical Composition Yield Strength
min. (KSI)
Tensile Strength
min.(KSI)
Yield to Tensile
Ratio (max)
Elongation %
ASTM A105, A106, A234, A333, A350, A420, A694,A860 C 0.16
Mn 1.60
Si 0.15-0.50
S 0.007
P 0.025
Cu 0.30
Ni 0.30
Cr 0.25
Mo 0.08
V 0.06
Nb 0.04
Ti 0.02
Sn 0.02
B 0.0005
N 0.014
Al 0.06 max
52 66 0.93 21


API 5L X52

Grade X52 indicates 52000 PSI minimum yield strength and 66000 PSI minimum ultimate tensile strength.

API Standard Specification for Line Pipe

The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.

Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000′s psi) of pipe produced to this grade.

Grade B (ASTM A53, A106, A523) (API 5LR) (API 5L PSL2)
Minimum Yield Strength: 35,000 psi 35,500 35,000 psi
Maximum Yield Strength: Nobe 65,000 psi
Minimum Tensile Strength: 60,000 psi 60,200 60,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This grade may be used for standard pipe, line pipe or conduit pipe as specified in the various ASTM and API specifications


Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

CHEMICAL COMPOSITION

Mass fraction, based upon heat and product analysis a
SEAMLESS PIPES
C Mn P S V Nb Ti
max b max.b max. max. max. max. max.
.28 1.20 0.030 0.030 c,d c,d d
WELDED PIPE
.26 1.20 0.030 0.030 c,d c,d d


MECHANICAL REQUIREMENTS

Y.S
Mpa(psi)
T.S
Mpa(psi)
ELONGATION
min min min
245(35 500) 415(60 200) 28%


0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.

For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum

concentration for manganese is permissible, up to a maximum of 1.65% Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.

The sum of the niobium , vanadium and titanium concentratons shall be ≤0.06%.

Unless otheriwse agreed.

Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%

API 5L X 52 PSL 1 Pipe Application

Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. API 5L X 52 PSL 1 Pipe is Environmentally Friendly as well Cost-Effective.

Carbon steel pipe – Examples of use

Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.

API 5L X 52 PSL 2 PIPES

API 5L X 52 PSL 2 PIPES

Stockist & supplier of API 5L X52 PSL 2 Pipe, extra strength API 5L X52 PSL 2 Pipe.

API 5L X52 PSL 2 Pipe Carbon steel pipe dealers and distributor in India, buy any quantity & size at best price.

Rexal Tubes has many sizes, grades, and OD’s ranging from 2-3/8″ to 13-3/8″. Whether it’s API 5L X52 PSL 2 Pipe, Gr B, X42, X52, X65, X70, X80 etc. We aggressively seek the best possible pricing from all our sources. Large OD used steel pipe is our specialty!

These efforts are relflected in our ability to pass our competitive prices on to you. Our strength in buying can save you money. We bring the largest selection of API 5L carbon steel tube and pipe products to market, including custom structural steel tubing and ASTM pipe products with specialty dimensions. With our immense range of sizes, we are confident we have the products you need.

API 5L X52 PSL 2 Pipe Specification:-

API 5L X52 PSL 2 Pipe Dimensions Table
Trade Name API 5L X52 PSL 2 Pipe
Weld Alternatives: ERW, HF, DSAW/SAWL, SMLS, HSAW
OD Size Range: ERW: 0.375" through 30"
HF: 0.840" through 24"
DSAW/SAWL: 12.75" through 144"

SMLS: 0.840" through 26"
HSAW: 8.625" through 144"
Wall Ranges: ERW: 0.120" through 1.000"
HF: 0.120" through 1.000"
DSAW/SAWL: 0.250" through 6.000"

SMLS: 0.250" through 2.500"
HSAW: 0.250" through 1.000"
Lengths: Single Random
Double Random
Custom (up to 300′)

Grade: ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345
Schedule: SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS
Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.
End Finishes: Beveled, Square Cut, Threaded & Coupled.
Additional Services: Internal Coating


API 5L X52 (PSL2)
Minimum Yield Strength: 52,200 psi
Maximum Yield Strength: 76,900 psi
Minimum Tensile Strength: 66,700 psi
Maximum Tensile Strength: 110,200 psi
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute) specification 5L.


API 5L X52 Industry Specifications Chemical Composition Yield Strength
min. (KSI)
Tensile Strength
min.(KSI)
Yield to Tensile
Ratio (max)
Elongation %
ASTM A105, A106, A234, A333, A350, A420, A694,A860 C 0.16
Mn 1.60
Si 0.15-0.50
S 0.007
P 0.025
Cu 0.30
Ni 0.30
Cr 0.25
Mo 0.08
V 0.06
Nb 0.04
Ti 0.02
Sn 0.02
B 0.0005
N 0.014
Al 0.06 max
52 66 0.93 21


API 5L X52

Grade X52 indicates 52000 PSI minimum yield strength and 66000 PSI minimum ultimate tensile strength.

API Standard Specification for Line Pipe

The American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.

Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000′s psi) of pipe produced to this grade.

Grade B (ASTM A53, A106, A523) (API 5LR) (API 5L PSL2)
Minimum Yield Strength: 35,000 psi 35,500 35,000 psi
Maximum Yield Strength: Nobe 65,000 psi
Minimum Tensile Strength: 60,000 psi 60,200 60,000 psi
Maximum Tensile Strength: None 110,000 psi
Notes: This grade may be used for standard pipe, line pipe or conduit pipe as specified in the various ASTM and API specifications


Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

CHEMICAL COMPOSITION

Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
L320N or X52N 0.24 0.4 1.2 0.025 0.015 0.07 0.05 0.04 e 0.43 0.25
L320N or X52N 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
L290M OR X52M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25


MECHANICAL REQUIREMENTS

Y.S
Mpa(psi)
T.S
Mpa(psi)
ELONGATION
min min min
320 (46 400) 435 (63 100) f


API 5L X52 PSL 2 Pipe Application

Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. API 5L X52 PSL 2 Pipe is Environmentally Friendly as well Cost-Effective.

Carbon steel pipe – Examples of use

Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.